Books

    2016

  1. Suresh K., “Introduction to Design Optimization”, Table of contents, sample chapter, accompanying code

Book Chapters

    2014

  1. Suresh K., “Large Scale Topology Optimization on High-Performance Computers”, Invited Book Chapter, ASME ACIER Publications, 2014.

Journal Publications

    2017

  1. Deng, S. H., Suresh, K., “Topology optimization under thermo-elastic buckling,” Structural and Multidisciplinary Optimization, Volume 55, Issue 5, pp 1759–1772, 2017.
  2. 2016

  3. Taheri, A. H., Suresh, K., “An isogeometric approach to topology optimization of multi-material and functionally graded structures,” International Journal of Numerical Methods in Engineering, Volume 109, Issue 5, pp:668–696, 2017.
  4. Mirzendehdel, A. M., Suresh, K., “Support structure constrained topology optimization for additive manufacturing,” Computer-Aided Design, accepted, dx.doi.org/10.1016/j.cad.2016.08.006, 2016.
  5. 2015

  6. Mirzendehdel, A. M., Suresh, K., “A Pareto-Optimal Approach to Multi-material Topology optimization,” Journal of Mechanical Design, 137(10) doi: 10.1115/1.4031088, 2015.
  7. Mirzendehdel, A. M., Suresh, K., “A Deflated Assembly Free Approach to Large-Scale Implicit Structural Dynamics,” J. Comput. Nonlinear Dynam., 10(6), doi: 10.1115/1.4029110, 2015.
  8. Krishnakumar, A., Suresh, K., “Hinge-Free compliant mechanism design via the Topological Level-Set,” Journal of Mechanical Design, 137(3), Mar, 2015.
  9. 2014

  10. Yadav, P., Suresh, K., “Large Scale Finite Element Analysis via Assembly Free Deflated Conjugate Gradient,” Journal of Computing and Information Science in Engineering, Volume 14, Number 4, December 2014.
  11. Deng, S., Suresh, K., “Multi-Constrained Topology Optimization via the Topological Sensitivity,” Structural and Multidisciplinary Optimization, DOI 10.1007/s00158-014-1188-6, November, 2014.
  12. 2013

  13. Suresh, K., “Efficient Generation of Large-Scale Pareto-Optimal Topologies,” Structural and Multidisciplinary Optimization, vol. 47, no 1, pp. 49 -61, 2013.
  14. Danczyk, J., Suresh, K., Finite element analysis over tangled simplicial meshes: Theory and implementation”, Finite Elements in Analysis and Design, Vol. 70-71, Pages 57–67, 2013.
  15. Suresh, K., Takalloozadeh, M., “Stress-constrained topology optimization: a topological level-set approach”, Structural and Multidisciplinary Optimization, Vol. 48, Issue 2, pp. 295-309, 2013.
  16. Yadav, P., Suresh, K., “Assembly-free Large-Scale Modal Analysis on the GPU”, Journal of Computing and Information Science in Engineering, Vol. 13, Issue 1, January 2013.
  17. 2012

  18. Mishra, V., Suresh, K., “A dual-representation strategy for the virtual assembly of thin deformable objects,” Virtual Reality, Vol. 16, Issue 1, 2012.
  19. 2011

  20. Jorabchi, K., Suresh, K., “A Robust Continuation Method to Pass Limit-Point Instability,” Finite Element in Analysis and Design, Vol. 47, Issue 11, 2011.
  21. Turevsky, I., Suresh, K., “Efficient Generation of Pareto-Optimal Topologies for Compliance Optimization,” International Journal of Numerical Methods in Engineering, Volume 87, Issue 12, pages 1207–1228, 2011.
  22. Mishra, V., Suresh, K., “Fast Iterative Solvers for Thin Structures,” Finite Element in Analysis and Design, Vol. 47, Issue 11, 2011.
  23. Samad, W., Suresh, K., “CAD-Integrated Analysis of 3-D Beams: A Surface-Integration Approach,” Engineering with Computers, vol. 27, no. 3, 201-210, 2011.
  24. 2010

  25. Suresh, K., “199-line Matlab code for Pareto-Optimal Tracing in Topology Optimization,” Structural and Multidisciplinary Optimization, Volume 42, Issue 5, pp 665-679 2010.
  26. Jorabchi, K., Danczyk, J., Suresh, K., “Algebraic Reduction for CAD Integrated Analysis,” Computer Aided Design, Volume 42 Issue 9, pp. 808-816, 2010.
  27. 2009

  28. Vemulapally, R., Suresh, K., “An Analysis Strategy for Swept Solids”, Engineering with Computers, vol. 25 (2), pp. 155-164, 2009.
  29. Jorabchi, K., Mishra, V., Suresh, K., “Efficient and Automated Analysis of Potentially Slender Structures”, Journal of Computing and Information Science in Engineering, vol. 9 (4), 2009.
  30. Jorabchi, K., Suresh, K., “Nonlinear Algebraic Reduction for Snap-Fit Simulation”, Journal of Mechanical Design, vol. 131 (6), 2009.
  31. Turevsky, I., Gopalakrishnan, S. H., Suresh, K., “An Efficient Numerical Method for Computing the Topological Sensitivity of Arbitrary Shaped Features in Plate Bending,” International Journal of Numerical Methods in Engineering, vol. 79 (13), pp. 1683-1702, 2009.
  32. 2008

  33. Gopalakrishnan, S. H., Suresh, K., “Feature Sensitivity: A Generalization of Topological Sensitivity," Finite Elements in Analysis and Design; vol. 44 (11), pp. 696-704, 2008.
  34. Turevsky, I., Gopalakrishnan, S. H., Suresh, K., “Defeaturing: A Posteriori Error Analysis via Feature Sensitivity,” International Journal of Numerical Methods in Engineering; vol. 76, 9, pp. 1379-1401, 2008.
  35. 2007

  36. Gopalakrishnan, S. H., Suresh, K. “A Formal Theory for Estimating Defeaturing-Induced Engineering Analysis Errors”, Computer Aided Design, Vol. 39 (1), January, 2007.
  37. Chen, J., Shapiro, V., Suresh, K., Tsukanov, I. “Parametric and Topological Control in Shape Optimization” International Journal of Numerical Methods in Engineering, Volume 71, No 3, 2007, pages 313-346.
  38. 2006

  39. Suresh, K. Sirpotdar, A., “Automated Symmetry Exploitation in Engineering Analysis”, Engineering with Computers; 21 (4), 304-311, 2006.
  40. Suresh, K. “Skeletal Reduction of Eigenvalue Problems over Thin Solids,” Chapter in Computational Methods, Eds: Liu, G.R, Tan, V.B.C. and Han, X., Springer-Netherlands, 2006.
  41. Suresh, K., Sinha, M., “A 2-D Model that Accounts for 3-D Fringing in MEMS Devices”, Journal of Engineering Analysis with Boundary Elements, Vol. 30, Issue 11, pp. 963-970, 2006.
  42. 2005 & Earlier

  43. Suresh, K. “Skeletal Reduction of Boundary Value Problems”, International Journal of Numerical Methods in Engineering, Accepted in November 2005.
  44. Suresh, K. “Generalization of the Mid-Element Dimensional Reduction,” Journal of Computing and Information Science in Engineering, Vol 3 (4), 308-314, 2003.
  45. Hartquist, E. E., Menon, J. P, Suresh, K., Voelcker, H. B., Zagajac, J., “A Computing Strategy for Applications Involving Offsets, Sweeps, and Minkowski Operations,” Computer Aided Design, pp. 175-183, 31, 1999.
  46. Suresh, K. and Voelcker, H. B., “New Challenges in Dimensional Metrology: A Case Study Based on Size,” Manufacturing Review, pp. 291-303, Vol. 7, No. 5, December 1994.
  47. Suresh, K. and Yang, D. C. H., “Constant Scallop Height Machining of Free-Form Surfaces,” Journal of Engineering for Industry, pp. 253-259, Vol. 116, No. 2, May 1994.

Peer-Reviewed Conference Publications

    2016

  1. Deng, S., Suresh, K., “TOPOLOGY OPTIMIZATION UNDER LINEAR THERMO-ELASTIC BUCKLING", DETC2016-59408, ASME-IDETC Conference, Charlotte, NC, August 2016.
  2. 2015

  3. Verma, C. S., Suresh, K., “A Robust Combinatorial Approach to Reduce Singularities in Quadrilateral Meshes,”, 24th International Meshing Roundtable, Austin, TX, 2015.
  4. Mirzendehdel, A. M., Suresh, K., “Multi-material Topology Optimization for Additive Manufacturing", DETC2015-46268, ASME-IDETC Conference, Boston, MA, August 2015.
  5. Krishnakumar, A., Chandrasekar A., Suresh, K., “Towards Assembly-Free Methods for Additive Manufacturing Simulation", DETC2015-46356, ASME-IDETC Conference, Boston, MA, August 2015.
  6. Suresh, K., “Topology Optimization on the Cloud: A Confluence of Technologies", DETC2015-46137, ASME-IDETC Conference, Boston, MA, August 2015.
  7. Bian, X., Yadav, P., Suresh, K., “Assembly-Free Buckling Analysis for Topology Optimization", DETC2015-46351, ASME-IDETC Conference, Boston, MA, August 2015.
  8. Deng, S., Suresh, K., “Predicting the Benefits of Topology Optimization", DETC2015-46349, ASME-IDETC Conference, Boston, MA, August 2015.
  9. 2014

  10. Yadav, P., Suresh, K., “Limited-Memory Deflated Conjugate Gradient for Solid Mechanics", DETC2014-34393, ASME-IDETC Conference, Buffalo, NY, August 2014
  11. Suresh, K., "Efficient Microstructural Design for Additive Manufacturing", DETC2014-34383, ASME-IDETC Conferences, Buffalo, NY, August 2014.
  12. Mirzendehdel, A. M., Suresh, K., “A Fast Time-Stepping Strategy for the Newmark Beta Method", DETC2014-34387, ASME-IDETC Conference, Buffalo, NY, August 2014.
  13. Deng, S., Suresh, K., Joo, J., “Stress Constrained Thermo-Elastic Topology Optimization: A Topological Sensitivity Approach", DETC2014-34385, ASME-IDETC Conference, Buffalo, NY, August 2014.
  14. Verma, C. S., Suresh, K., “Towards FEA over Tangled Quads", 23rd International Meshing Roundtable (IMR), London, United Kingdom, October, 2014.
  15. Suresh, K., “Efficient Microstructural Design for Additive Manufacturing,” in ASME 2014 IDETC/CIE Conference, Buffalo, NY, USA, 2014.
  16. 2013

  17. Takalloozadeh, M., Suresh, K., “Displacement and Stress Constrained Topology Optimization", DETC2013-13521, ASME-IDETC Conferences, Portland, August 2013.
  18. Suresh, K., “Hinge-Free Compliant Mechanism Design via the Topological Level-Set", DETC2013-12433, ASME-IDETC Conferences, Portland, August 2013.
  19. 2012

  20. Danczyk, J., Suresh, K., “Finite Element Analysis of Tangled Meshes,” ASME I-DETC/CIE Conference, Chicago, 2012.
  21. Suresh, K., Yadav, P., “Large-Scale Modal Analysis on Multi-Core Architectures,” ASME I-DETC/CIE Conference, Chicago, 2012.
  22. Suresh, K., Ramani, A., Kaushik, A., “An Adaptive Weighting Strategy for Multi-Load Topology Optimization,” ASME I-DETC/CIE Conference, Chicago, 2012.
  23. 2011

  24. Turevsky, I., Suresh, K., “Tracing the Envelope of the Objective-Space in Multi-Objective Topology Optimization,” ASME I-DETC/CIE Conference, Washington, D.C, August 2011.
  25. Danczyk, J., Suresh, K., “Improving the Condition Number of Finite Element Stiffness Matrices via Inverted Elements,” ASME I-DETC/CIE Conference, Washington, D.C, August 2011.
  26. Mishra, V., Suresh, K., “GPU-friendly Preconditioners for Efficient 3-D Finite Element Analysis of Thin Structures,” ASME I-DETC/CIE Conference, Washington, D.C, August 2011.
  27. 2010

  28. Danczyk, J., Suresh, K., “Coupling Non-Conforming Discrete Models with Lower-Dimensional Entities,” 19th Meshing Roundtable Conference, Chattanooga, Tennessee, 2010.
  29. Suresh, K., “Tracing Pareto-Optimal Frontiers in Topology Optimization,” ASME I-DETC/CIE Conference, Montreal, Canada, August 2010.
  30. 2009

  31. Mishra, V., Suresh, K., “Efficient Analysis of 3-D Plates via Algebraic Reduction”, ASME IDETC/CIE Conference, San Diego, California, 2009; Best Paper Award.
  32. 2007

  33. Danczyk, J., I., Suresh, K., “An Efficient CAD-Integrated Multidimensional Model for Microfluidic Simulations,” ASME IDETC/CIE Conference, Las Vegas, September 2007.
  34. Turevsky, I., Gopalakrishnan, S. H., Suresh, K., “Generalization of Topological Sensitivity and its Application to Defeaturing,” ASME IDETC/CIE Conference, Las Vegas, September 2007.
  35. Gopalakrishnan, S. H., Suresh, K., “Estimating the Impact of Large Design Changes in Field Problems,” ACM Symposium on Solid and Physical Modeling, Beijing, China, June 2007.
  36. Qin, I., Colosimo, T., Olida, R., Vemulapally, R., Suresh, K., “Wire Bond Loop Formation Study through FEA Modeling of Large Elasto-Plastic Deformation,” SEMICON, China, March 2007
  37. Titz, B., Jorabchi, K., Suresh, K., Jeraj, R., “A Simple Continuum Mechanics Approach Towards Multiscale Tumor Modeling,” 9th US National Congress on Computational Mechanics, San Francisco, California, 2007.
  38. 2006

  39. Gopalakrishnan, S. H., Suresh, K., “Exploiting Shape Similarity in Engineering Analysis,” ASME IDETC/CIE Conference, Philadelphia, September 2006.
  40. Chen, J., Shapiro, V., Suresh, K., Tsukanov, I. “Parametric and Topological Control in Shape Optimization,” ASME IDETC/CIE Conference, Philadelphia, September 2006; Best Paper Award.
  41. 2005 & Earlier

  42. Suresh, K. “Skeletal Reduction of Boundary Value Problems”, International Journal of Numerical Methods in Engineering, Accepted in November 2005.
  43. Sinha, M, Suresh, K. “Simplified Engineering Analysis via Medial Mesh Reduction,” ACM Symposium on Solid and Physical Modeling, MIT, Boston, June 2005.
  44. Suresh K., “Automating the CAD/CAE Dimensional Reduction Process,” 8th ACM Solid Modeling Conference, Seattle, June 2003.
  45. Suresh, K., “Monte Carlo Analysis Techniques Revisited,” ASME IDETC/CIE Conference; Sacramento, CA, September 1997.
  46. Suresh, K. and Zagajac J., “Fast Monte Carlo Domain Sampling for Discrete Field Value Estimation,” Proc. Fourth ACM Symposium on Solid Modeling and Applications, Ed. C. Hoffmann and W. Bronsvort, pp. 354-363; Atlanta, GA, May 1997.
  47. Suresh K., “Fast Point-Solution Techniques in Engineering Analysis,” Intl. Conf. on Advances in Mechanical Engineering, Bangalore, India; Mruthyunjaya, T. S., Ed., pp. 385-400, December 1995.